Replacing Your Carpet

Most of the carpets that you can find in the market are meant to be long lasting. However, there will be times when their life span is cut short, perhaps because of a huge soiling or stain problem. New York Carpet cleaning and maintenance may not have been the owner’s priority. Carpets may have already developed mildew or bacteria because of neglect, which can be potentially harmful to your health. Or you just want to have a totally new look into your home, and sadly, your good old carpet doesn’t fit in.

There will come a time when you need to replace your carpet. Regardless of how many times you have called a professional carpet cleaner and restorer, the carpet just isn’t the same. Though saying good bye to the original one is hard, installing the new carpet may be a bit harder too. To make sure that you won’t have to struggle on how to set up the latter, you can take note of the following tips:

1. Get rid of the old carpet first. There are actually home owners out there who would rather place the new one on top of the old carpet. It saves them time and energy. But this method is discouraged by professional carpet cleaners and installers. Even the best New York carpet cleaners will tell you this is a bad practice. What they really don’t know is that there’s a huge chance that the new carpet will inherit the issues of the first one. This is especially true if the latter is already having moisture build-up, which causes it to smell really bad and increase the possibility of developing mildew and molds.

You should remove the old carpet completely first before you decide to install what you have just bought. You can simply roll the carpet, or if it’s attached to the floor, you have to remove the tack strip or the glue. Moreover, if the carpet is firmly attached to the wall, you can just cut at least three feet of the carpet from the wall using a utility knife. If this sounds a tad bit complex, you might want to call in the home carpet cleaners and installers for an easier approach to your chore.

2. Let a professional carpet cleaner clean the area first. When you have removed the carpet, it’s time to clean the location where you are going to add the new one. You can do it on your own, or you can let a home carpet cleaner help you out with that. Most of them will go for steam cleaning to make sure that any microorganism that has been growing in the floor will be completely destroyed. Having carpet cleaners around is also ideal when you have no other help in installing the new carpet. A number of these carpet cleaning companies offer free installation to their clients as part of their add-on services. If it’s not for free, then know how much it will cost you. Definitely, though, it’s not going to break your bank.

3. Get all the materials ready. Some carpet owners would just gently roll the new carpet to the area where you used to find the old one. Unless you’re going to place something on top of it like a coffee table or a desk, you may have to secure the carpet using tack strips. You may also nee a hammer, pry bar, and maybe a nail. This can be tricky, so it is smart to hire the service of a home carpet cleaner.

Ask Help

Most of the instructions on how to install the carpet on your own can be found in your manual. All you have to do is to follow them to a T to make sure that you won’t end up damaging your carpet during the process. However, if there are some things that you can’t understand or you’re really not confident to set up the carpet on your own, then you should call for help from the professional carpet cleaners.

Aside from the carpet cleaners, you can get assistance from home remodelers. They will not only install your carpet, but they can also inform you the most ideal design to ensure that you have found a more suitable and better carpet than the first one.

Related posts:

1. The Difference Between Using Shampoo and Steam in Carpet Cleaning
2. A Simple Guide to Carpet Installation
3. Expert Advice on Carpet Cleaning

Tagged with: carpet • Replacing

Like this post? Subscribe to my RSS feed and get loads more!